+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: High Compression Ratio Heads (/showthread.php?tid=9364)
High Compression Ratio Heads - Charles P - 14-05-2024
I did have a note of how much the CR increases when you machine a '37 head, but I can't find it.
I recall that the standard head is 1" thick but want to know how much taking 40 thou off impacts the theoretical CR
Can anyone help?
Thanks
Charles
RE: High Compression Ratio Heads - Colin Morgan - 14-05-2024
As a start, this page has some useful information:
https://www.ba7c.org/technicalArticles/compressionRatios.html
RE: High Compression Ratio Heads - Charles P - 14-05-2024
(14-05-2024, 06:25 PM)Colin Morgan Wrote: As a start, this page has some useful information:
https://www.ba7c.org/technicalArticles/compressionRatios.html
Perfect - thanks Colin