+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Front toe in (/showthread.php?tid=8730)
Front toe in - frequentflyer - 11-07-2023
Following some strange handeling effects our special developed I have been through all of the normal stuff and found nothing until I looked at the front end. It appears the offside wheel points somewhere near correct and the drivers side points out from where I would normally expect. Most likely the result of a bump whilst trialing or one of the many large potholes in the roads round here. I was wondering what the correct toe in should be in terms of angle or measurment front to mack of the wheel.
Regards in advance
Hugh
RE: Front toe in - Chris KC - 11-07-2023
Hi Hugh,
Somewhere between zero and 1/8" toe-in should be about right.
RE: Front toe in - frequentflyer - 11-07-2023
Thanks I will dig out the dunlop tracking jig and set to 1/8" on Thursday and try it out on the way to work on Friday
RE: Front toe in - Tony Press - 11-07-2023
Should do it- make sure the caster is correct as well. Both kingpins leaning back just a little.