The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
|
Fuel tank sender screws - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Fuel tank sender screws (/showthread.php?tid=809) Pages:
1
2
|
Fuel tank sender screws - Roland Alcock - 09-02-2018 Are the fuel tank sender retaining screws 1/4 BSF? For my 1935 Opal. Thanks Roly RE: Fuel tank sender screws - Pearls not a Singer - 09-02-2018 Hi Roly I can't remember which size it was but I have the correct tap if you need to borrow it drop me a PM RE: Fuel tank sender screws - Roland Alcock - 09-02-2018 (09-02-2018, 12:26 PM)Pearls not a Singer Wrote: Hi Roly Thanks David, I’ll bear that in mind. Roly. RE: Fuel tank sender screws - Peter Clayton - 09-02-2018 (09-02-2018, 12:43 PM)Roland Alcock Wrote:I seem to recall on the old forum someone said they are the same as the old "Meccano" screws .(09-02-2018, 12:26 PM)Pearls not a Singer Wrote: Hi Roly RE: Fuel tank sender screws - Stuart Joseph - 09-02-2018 Good afternoon all. Original Meccano screws are (were) 5/32" Whitworth. Regards from the creative county - Staffordshire Stuart RE: Fuel tank sender screws - Roland Alcock - 09-02-2018 Thank you. Roly RE: Fuel tank sender screws - Bob Kneale - 10-02-2018 (09-02-2018, 11:54 AM)Roland Alcock Wrote: Are the fuel tank sender retaining screws 1/4 BSF? For my 1935 Opal. Hi Roly The original thread was 3BA - not an easy one to source screws! On some tanks the thread was 'meccano' or very similar. I replaced the ones on my '37 ruby with M5. I doubt if the concours judges would spot it! Cheers Bob RE: Fuel tank sender screws - Hedd Jones - 10-02-2018 Ive done the same job with 4 or 5 rear mounted tanks now. On RP's, Rubys, and a big 7. Every time ive used 5/32 BSW meccano screws. Fits perfectly. No tap required usually. Given I havnt got one thats good. I just make a primitive chaser on the odd occasion one is tight. RE: Fuel tank sender screws - Roland Alcock - 10-02-2018 Tank is removed and tank sender is also removed. 4 out of the 6 screws came out once the slot had been cleaned out. The sender pivot was seized and is now free. Lots of scale inside and out on the sender. The float is two wine bottle corks which have become saturated. The resistance range measures evenly across the scale from 1.5 to 20 ohms. I have no idea yet if this is correct. I am optimistic that it will function well once I have fixed the float. Thank you for the responses. Roly RE: Fuel tank sender screws - Pearls not a Singer - 10-02-2018 I believe that similar operating arms were used by BMC, british Leyland, Rover et al up until the nineties. My sender has worked since 1985 with a plastic Austin Maxi float which fits perfectly into the loop on the end. If our cherished suppliers don't have a gasket, one should be available from an Austin Healey Sprite spares supplier |