Austinsevenfriends
Need help with a half shaft/hub - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Need help with a half shaft/hub (/showthread.php?tid=7543)



Need help with a half shaft/hub - Luke.Seddon - 22-05-2022

New owner, only collected the car yesterday.

In an attempt to remove the hub with a hub puller tool, I have instead pushed the half shaft inwards towards the diff. The hub will not come off and nor will it rotate anymore.

Does anyone know what I should do next to rectify the issue?

Thanks in advance,

Luke


RE: Need help with a half shaft/hub - Steve Jones - 22-05-2022

The Hub 'Puller' is, actually, a Half Shaft 'Pusher' and, therefore, it's done exactly what it's designed to do. The hub won't turn because the diff is locked by the action of pushing the half shaft into it. The hub outer should now be removable but is, probably, stuck to the hub inner. A little gentle persuasion between the two should solve the problem but be careful as it is possible to distort the hub flange if you attack the junction of the inner and outer hubs too enthusiastically. In this situation, place a suitable sized nut into the hole in the end of the hub outer, re-fit your puller/pusher and continue to tighten and you should find the two halves of the hub separate.

Steve


RE: Need help with a half shaft/hub - Luke.Seddon - 22-05-2022

Great, thank you. I’ll go try that now! Thanks for the advice.


RE: Need help with a half shaft/hub - Ian Williams - 23-05-2022

Dumb question maybe, but I hope you are using an Austin 7 hub puller not a three legged puller which will never work. There is a bearing inside the hub that retains the inner portion, you need to remove the outer half first then remove the big bearing retaining nut.


RE: Need help with a half shaft/hub - Luke.Seddon - 23-05-2022

Using a nut as a spacer worked a treat, it is now free.

Thanks for the suggestion. ?