New spring recommendations - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: New spring recommendations (/showthread.php?tid=1669) |
New spring recommendations - Tom Coates - 03-09-2018 I want to get some new rear springs for my Cup with a reduced camber. I had considered ruby springs but I think these will be too bulky for the limited space available inside the body, and probably too stiff anyway. Can anyone recommend a supplier for decent well finished road springs with spear ends etc..? I’ve heard mixed reviews about Jones Springs - some people say that they can be a bit rough and ready, others have had good results. I would normally get them from Ian but as they are non-standard and I need them fairly quickly he can’t help unfortunately. Also, could somebody confirm the specs for a late 20’s chummy rear spring – overall length of the main leaf, number and section of the leaves and dimensions for the eyes and main mounting bolt hole? RE: New spring recommendations - Ian Dunford - 03-09-2018 Tom. I have sent you an email. Ian RE: New spring recommendations - Hedd Jones - 03-09-2018 If anyone has any recommendations for spring specialists in the north west please let me know. A friend of mine needs to have a full set off a 1933 Sentinel 6 wheel steam lorry seen too. Our mutual contact 'Arnie' in Liverpool has packed up RE: New spring recommendations - Viteran - 03-09-2018 I am not sure if it is what you want but Owen springs in rotherham were knowledgeable and did a good job on my Wolseley hornet special springs. They are usually at the NEC in November? And at least north of Watford! Ian RE: New spring recommendations - Mr Pharmacist - 04-09-2018 (03-09-2018, 09:56 PM)Hedd Jones Wrote: If anyone has any recommendations for spring specialists in the north west please let me know. A friend of mine needs to have a full set off a 1933 Sentinel 6 wheel steam lorry seen too. Our mutual contact 'Arnie' in Liverpool has packed up I saw someone mention thsi company the other day - i have no experience of them, but as they are near where i work (Rossendale) it piqued my interest https://www.rossroadsprings.co.uk/ |