+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Moseley Float on Air (/showthread.php?tid=8783)
RE: Moseley Float on Air - JonE - 29-05-2024
MTB fattie tubes are getting cheaper and cheaper - you can get a pair (two seats) for about 15 quid. You do need to be able to make two rubber retaining rings with a bit of rubber sealant tho'. But they work perfectly.
RE: Moseley Float on Air - Hugh Barnes - 29-05-2024
Thanks Chris. The reason I ask is I have just been shown an image of what appears to be a very good reproduction of the original. I am awaiting details of its source and pricing..
RE: Moseley Float on Air - Tony Griffiths - 29-05-2024
Thanks, Chris. I'm very interested in sets for the Ruby. Does anyone know what the Ulster used - surely it can't have been springs?
RE: Moseley Float on Air - Chris Garner - 29-05-2024
Tony,
Float-on-Air...as did the Nippy / 65 and the Speedy / 75.
RE: Moseley Float on Air - Erich - 30-05-2024
Tony, as Chris has said, Ulsters(EA Sports) used Moseley Float-on-Air. As far as inflation, here is a guide on inflation. In the case of the prototypes we are having made, I'm putting a set into my Frazer Nash for evaluation. They have the same type of valve that is mouth inflated, and can be pushed in out of the way. Photo also attached.
RE: Moseley Float on Air - Tony Griffiths - 30-05-2024
(29-05-2024, 07:25 PM)Chris Garner Wrote: Tony,
Float-on-Air...as did the Nippy / 65 and the Speedy / 75.
Thanks, Chris. I'll need a set for that, too. Now, where's that bank loan application....
(30-05-2024, 12:04 AM)Erich Wrote: Tony, as Chris has said, Ulsters(EA Sports) used Moseley Float-on-Air. As far as inflation, here is a guide on inflation. In the case of the prototypes we are having made, I'm putting a set into my Frazer Nash for evaluation. They have the same type of valve that is mouth inflated, and can be pushed in out of the way. Photo also attached.
Thank you, Eric. Progress on this interesting matter is looking most hopeful.
RE: Moseley Float on Air - Erich - 31-05-2024
Hi Tony, the cost will depend on volume. But my intention is to replicate as closely as possible, the original Moseley bladders, and perhaps modify for better durability. That said, the original Moseley's I have in my Type 75, are still able to hold air except for one valve. And this goes back at least to 1961. The key is that there are two bladders, located so that they are held in place with an outer for thigh support and an inner which supports the bum. They are simple, certainly, but amazingly comfortable. Once I have confirmed durability, Chris and I can start production. I am, as an aside, surprised they went out of business in the 50's as it really is a good design. I would have preferred them in my 1971 MGB which I bought new. But they do require adjustment.
Best,
Erich
RE: Moseley Float on Air - bobthompson - 31-05-2024
If it helps you judge the demand - I will be up for a pair!
RE: Moseley Float on Air - Mike Costigan - 31-05-2024
It might be worth canvassing outside the Austin Seven community; lots of cars used the Moseley Air Cushion, including Alvis, Lagonda, Riley and Talbot, and presumably other Austin models like the Ten?
RE: Moseley Float on Air - Erich - 01-06-2024
Mike, Frazer Nashes used them and I am going to be testing prototypes in my '27 Boulogne. I believe Astons used them, and I know Morgans used them up to the fifties. I'm not sure about MG, but I also think that HRGs used them. I have at least one other 'Nash owner who wants a pair. Once I have found the prototypes work well and meet my requirements, we'll contact the various clubs to gauge interest.