The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
What have you done today with your Austin Seven - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: What have you done today with your Austin Seven (/showthread.php?tid=1921)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661

RE: What have you done today with your Austin Seven - gezparton - 22-03-2022

WHO SAID THAT !

RE: What have you done today with your Austin Seven - dickie65 - 22-03-2022

I am about to go into the garage and play with a Nippy Engine kit of parts.

RE: What have you done today with your Austin Seven - sparkeysprite - 22-03-2022

(22-03-2022, 05:01 PM)Ivor Hawkins Wrote: Lovely photographs of the little boat tail (what’s going on with those seats?) and the box saloon, great to see them both out and about...I was thinking of taking the box across country to Heathrow, but all the road closures for HS2 and the East West railway are a complete nightmare, so took tg3 modern do2n the M40!

I forget how many motors I’ve pulled apart that look like yours Hedd, nothing a good blasting and some creative metalwork can’t fix...

Hi Ivor, I don't know what's going on with the seats - they were in it when I got it and they look like other 7 seats I've seen (but I've not seen another boat tail like mine..)  I think that perhaps they look a bit "prominent" because the car doesn't have a hood (at present) and the hood would normally be folded behind them, hiding them from view..?

RE: What have you done today with your Austin Seven - Ivor Hawkins - 23-03-2022

Hi Sparkey, ah, you could be right, most have the hood folded down, which would hide the top of the seats, it looked like you had Austin 12 seats in there!

RE: What have you done today with your Austin Seven - David Stepney - 23-03-2022

I took the Seven over the mountains to feed the horses and visit a friend whom I had not seen since lockdown who  lives just outside Llanrhaeadr-ym-Mochnant, a round trip of about 40miles, taking me through Llangynog and Penybont Fawr.


.jpg   S021I001.JPG (Size: 123.73 KB / Downloads: 313)


The Seven in Llanrhaeadr-ym-Mochnant Village

RE: What have you done today with your Austin Seven - Malcolm Parker - 24-03-2022

(22-03-2022, 03:08 PM)Hedd_Jones Wrote: Malcolm, very nice. When I restored by RL I wanted to paint it black. I had red wheels in stock. I wanted black over black, red wheels and trim. I was persuaded out of it, and went for a dove grey body. No regrets. But your car looks stunning. 

Noting the blue coachline, father used to have the 1931 poverty model (and thus side valve) Singer 10 saloon. Original finish for the rolling chassis was a very deep blue. almost a royal blue. I have always thought a royal blue chassis, with black coachwork would be very smart, with option of blue or black wheels. 

Thanks for the kind comments, Hedd.  My car was originally dark blue and when I restored it in 1999 I decided on all black.  Andy Hastings, who did the bodywork recoiled in horror.  He regarded black as the most difficult colour, due to the way it reflects the light.  If you look at the rear body panels either side of the rear window, you can still see that they are slightly indented where the car has been pushed over the years.
When I got the car, the trim was a beige woolen material.  It left the factory with cloth trim but this had been replaced. From the word go I wanted it to have moquette upholstery which was woven for me by Holdsworth's in Halifax, at one time the leading supplier of moquette in the world.   The same pattern moquette was subsequently used when the works twin-cam was restored.   My car doesn't share any other twin-cam parts!
I will be driving the RL down to Moreton in Marsh in July.  I will shortly be fitting the engine and gearbox that are currently in the Ulster rep.  I am hoping that the extra torque will suit the 'Andes' gear ratios and make the car even more enjoyable to drive.

RE: What have you done today with your Austin Seven - Hedd_Jones - 24-03-2022

Malcolm

My own RL body must have suffered a rear quarter collision at some point, the body is twisted, and the dints were seemingly knocked out with a ball pein hammer. Consequently there is just a little filler in the rear end! Grey was probably a better choice for the reasons you state.

I enjoy driving my RL most out of the 3 cars here. I prefer the 3 speed box to the 4 speed box of the later car, and the ball change lever is infinitely better than the stumpy gate change lever on the chummy. The brakes are better too being coupled. I've also had it the longest so I guess i've got bias.

Do you know where in Shropshire your car was new to?

RE: What have you done today with your Austin Seven - Duncan Grimmond - 24-03-2022

Speaking of black paint Mervin Hoyle was in Ripon market square today doing one of his regular Marie Curie charity collections and the black on his wings is deep enough to dive into!

RE: What have you done today with your Austin Seven - Malcolm Parker - 24-03-2022

               
Hedd

My car UX 8191 was registered on 1st March 1931 to a Mr Alfred Kay of 3, Atcham, Shrewsbury.   It then spent several years in Whitchurch before being sold in 1974 to a chap in Shavington, Crewe who did little with the car except dismantle it and strip the paint of the bonnet until it came my way in 1998.
I was put onto the car by a joiner friend in Thirsk who was pally with a lad who worked as a caretaker at Breckenborough Hall, a stately home 4 miles west of Thirsk.  The car belonged to this lads Father in law.  As usual when I was alerted to the car, I guessed it might be an Austin A30 or something, but a few days later my joiner pal came into my office with a photocopy of the log book and a photograph, probably taken in the late 50's or early 60's.  I was confident buying the car 'unseen' but many people would have scrapped the body and built an Ulsteroid on the chassis and running gear.  When purchased it had a later 3 brg engine and 4 speed box fitted and the tunnel and bulkhead had been butchered accordingly.  Also the two front seats had been replaced by a large bench seat, a sort of homemade sofa that weighed a ton.
On getting the car back home to Boltby, Whilst still on the drive I bolted the carburettor which was in the back of the car back on, filled the float chamber with petrol and connected a battery to the coil.  On the first turn of the handle the engine burst into life, the fan nearly taking my nose end off.   The engine cannot have run since 1974 at least, some 25 years previously.
Like you, I enjoy the RL more than any other Austin 7 I have ever owned.   It has always had a mildly tuned engine which helps with the hills.   Below are some photos of the car when I got it and during the restoration.  The photos are scans so the colours are a bit weird.
I later found out that Breckenborough Hall was the home of Sir Francis Samuelson, a well known Austin 7 racing driver.

RE: What have you done today with your Austin Seven - Hedd_Jones - 24-03-2022

Having worked for many years in Shrewsbury, lived in Whitchurch, and Shavington is not so far from where I currently live (7 or 8 miles away), its very much a local car to the area here. I'm not local to here however, I'm welsh.

My RL suffered the fate yours may have, in that the bodywork was removed from the running gear, actually to build a tourer. As the chassis no plate was still on the body when we bought it, I can see it is now an AF tourer and has lost its original registration number.

We got the body, wings/doors bonnet etc from an advert in the Exchange and Mart.

We had (and I still have) a significant number of Seven spares, but did not have any SWB coupled chassis (they have always been valuable things to sell)

Father was a prolific finder of stuff, and dealt a lot in vintage car spares, some of which also came from the scrap (he was a scrap metal dealer as well as a local authority engineer). He knew of the remains of a SWB 7 box saloon and a 10 saloon in a wood on a farm locally, the bodies were so bad that they had practically disintegrated and there were no mechanical components, hence he had never bothered with them before.

Luckily for us the 7 was an RL with a chassis (and steering box), and even better the farmer still had the log book for it. Turns out this chassis was 18 chassis numbers from the chassis my body had been fitted to.

Merging the two, running gear components out of the spares shed, an engine from Mick Kirkland and bingo I had a 'car'. The hardest thing to find was the fuel tank. A screw on badge type cowl was also a challenge. And I had to buy a set of closed centre wheels.

Having built it up from bits, it is probably not amazingly 'year correct', but over time I have made it more accurate. I see yours has the same throttle shaft as the RP has for example, mine is a chummy one I bent to make it work better.

The 10 chassis was FUBAR, and much of it was left there, but the 'car' did yield 4 nice bakerlight door catch covers. In the days before 3d printing, and when people were still restoring vintage cars these sold for more money than we paid for the remains of the 2 cars!.