The following warnings occurred: | |||||||||||||||
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
|
Engine Number Identification - Printable Version +- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum) +-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1) +--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14) +--- Thread: Engine Number Identification (/showthread.php?tid=2130) |
RE: Engine Number Identification - Martin Prior - 18-12-2018 (18-12-2018, 08:32 AM)Jamie Wrote: Thank you all for the information. I've seen far worse, but I've never seen this combination of engine and gearbox installed in a Ruby. Something done in the car's last dying days, I suspect. The starter for this engine would have looked like the photo below, with the starter motor facing into the cab. RE: Engine Number Identification - Mike Costigan - 18-12-2018 You really need to be looking for the correct style of engine for the Ruby; they are readily available (you may even be able to choose a crankcase with number very near you car's original unit) and probably worth less than the early engine you have, so perhaps there will be someone interested in doing a swap maybe even with cash going your way! Make sure you get all the ancilliaries such as the forward-facing starter motor, screw-in oil filler stem, petrol pump, etc. RE: Engine Number Identification - Chris KC - 18-12-2018 Almost certainly trashed the original engine and bunged in the nearest available substitute, a starter motor is a luxury you can easily get by without (at least you could in those days). I recall doing something very similar with my Fiat 500 one mid-winter. Is that a spare Martin? RE: Engine Number Identification - Austin in the Shed - 18-12-2018 (18-12-2018, 08:32 AM)Jamie Wrote: Thank you all for the information. (18-12-2018, 03:22 PM)Austin in the Shed Wrote:It isn't the same car.(18-12-2018, 08:32 AM)Jamie Wrote: Thank you all for the information. RE: Engine Number Identification - Jamie - 19-12-2018 Thank you all for the information. The engine is not quite what I had assumed that it would be, I confess. I can fully understand, though, a previous owner fitting whatever they could find just to get back on the road. I shall have to mull over what best to do and perhaps look out for a Ruby engine. Regards, Jamie. |