The following warnings occurred:
Warning [2] Undefined property: MyLanguage::$archive_pages - Line: 2 - File: printthread.php(287) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/printthread.php(287) : eval()'d code 2 errorHandler->error_callback
/printthread.php 287 eval
/printthread.php 117 printthread_multipage



Austinsevenfriends
3 bearing case with a Phoenix crank modification - Printable Version

+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: 3 bearing case with a Phoenix crank modification (/showthread.php?tid=9544)

Pages: 1 2

RE: 3 bearing case with a Phoenix crank modification - Tony Press - 25-08-2024

No pictures? 
Got them now Big Grin

Thanks.

RE: 3 bearing case with a Phoenix crank modification - Hairy - 25-08-2024

Working on it!

RE: 3 bearing case with a Phoenix crank modification - wild_willy - 26-08-2024

Thanks all for the info. Seems to be multiple successful ways of doing this - not surprising with so many talented and innovative Austin 7 owners in the Forum.

Seeing the bore hole for the stud is 0.453", the same as required by a 7/16" Helicoil, I might just tap the original stud to 7/16" and use it that way.
Cheers
Bruce