+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Wheels nuts (/showthread.php?tid=7086)
Pages:
1
2
RE: Wheels nuts - GrahamW - 18-01-2022
Thanks for the pointers on the nuts
RE: Wheels nuts - Stumpi - 18-01-2022
I would avoid aeronuts as they tend to damage the stud thread,I have been using nylocs for 30years with no problems on my trials car and I use a torque wrench when possible.the only problem I have encountered is that the drum relies on the countersunk screws for location,so have reduced the stud hole so it’s a good fit on studs using a stainless bush in drum.
Andy
RE: Wheels nuts - Peter Johnson - 18-01-2022
+1 recommendation for the washers made by Alistair Frayling-Cork which I have used on my cup model in VSCC sprints and hill climbs. Absolutely worth the money.
RE: Wheels nuts - GrahamW - 19-01-2022
Does anyone have contact details for Charlie Plain Jones ?
RE: Wheels nuts - Hugh Barnes - 19-01-2022
Message sent, Graham....