+- Austinsevenfriends (https://www.austinsevenfriends.co.uk/forum)
+-- Forum: Austin Seven Friends Forum (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=1)
+--- Forum: Forum chat... (https://www.austinsevenfriends.co.uk/forum/forumdisplay.php?fid=14)
+--- Thread: Starter dog thread (/showthread.php?tid=2425)
Pages:
1
2
RE: Starter dog thread - Bill Sheehan - 22-02-2019
Tony - only if you Dressed them with oil before installing? Cheers, Bill in Oz
RE: Starter dog thread - Bob Culver - 23-02-2019
I appreciate the uniform joke, but to be pedantic...
Unified can now be considered the American standard, but the previous American National thread, esp early version, differed from Unified form although both 60 deg.
The Cycle threads as on original spokes are 60 deg but yet another form.
RE: Starter dog thread - Colin Wilks - 10-03-2019
For the sake of completeness, the subject of oddball sizes / Admiralty threads was discussed on the old forum:
http://pub25.bravenet.com/forum/static/show.php?usernum=2099944454&frmid=5&msgid=951521&cmd=show
The taps and dies for 5/8" x 16 tpi are listed on the Tracy Tools site:
https://www.tracytools.com/taps-and-dies/whitform-taps-dies?product_id=1108